RENOPLAN SYSTEM 11

How can textile floor coverings be installed on existing wood flooring or laminate without damaging the existing surface? With Sigan 3.

Wood flooring or laminate floors are often encountered as substrates in renovation projects. To install a new textile flooring that does not damage the existing floor, Sigan 3 is recommended. The advantage of Sigan 3 is that the new textile flooring can be installed quickly and cleanly. Sigan 3 is guaranteed to leave no residues on the original floor when the floor covering is removed. The original floor can then be used again or serve once more as substrate for new floor coverings.

<p>Damp wipe the substrate with clean water
to remove dust and dirt etc. Then wait until
the surface is dry.</p>

Damp wipe the substrate with clean water to remove dust and dirt etc. Then wait until the surface...

<p>First perform a trial to check whether Sigan 3 adheres to the existing wooden flooring.</p>

First perform a trial to check whether Sigan 3 adheres to the existing wooden flooring.

<p>Apply the Sigan 3 tape along the walls and doors. This provides increased adhesive strength in the edge areas.</p>

Apply the Sigan 3 tape along the walls and doors. This provides increased adhesive strength in the...

<p>Install the Sigan 3 in the running direction of the new floor covering preferably roll out overlapping, rub down well and then cut back to the joint (be careful not to damage the existing floor). Alternatively, Sigan can also be
installed using a 2-man method. </p>

Install the Sigan 3 in the running direction of the new floor covering preferably roll out...

<p>Fit the acclimatized textile floor covering.</p>

Fit the acclimatized textile floor covering.

<p>Fold back half of the floor covering. Pull the protective paper away from the Sigan 3.</p>

Fold back half of the floor covering. Pull the protective paper away from the Sigan 3.

<p>Install the floor covering onto the Sigan 3
and roll out.</p>

Install the floor covering onto the Sigan 3 and roll out.

<p>Now fold back the second half of the floor
covering. Pull the protective paper away from
the Sigan 3 and pick up the dirt with the help
of the flap created. Then install the remaining
floor covering onto the Sigan 3 and roll out.</p>

Now fold back the second half of the floor covering. Pull the protective paper away from the...

<p>The floor covering can be walked on and used immediately. Roll up the protective paper
to reduce the volume of waste.</p>

The floor covering can be walked on and used immediately. Roll up the protective paper to reduce...

<p>The floor covering can be removed years later
without leaving residues.</p>

The floor covering can be removed years later without leaving residues.