RENOPLAN SYSTEM 12

How can luxury vinyl tiles be installed quickly and securely whilst being made dimensionally stable? With Sigan Elements Plus.

The constantly growing variety of PVC floor coverings and luxury vinyl tiles places the highest demands onto adhesives and installation materials because they often react with the floor covering. This can result in joint formations, dimensional changes and tension due to plasticiser migration. The metal-reinforced special adhesive system Sigan Elements Plus counteracts even massive plasticiser impact and thus guarantees dimensionally stable installations. The risk of joint formation is also minimised. As with all switchTec adhesives, Sigan Elements Plus is time-saving, clean and leaves no residues when the floor covering is removed.

<p>The substrate must be sound, flat,
permanently dry, free from cracks,
clean and free of materials that could
impair adhesion.</p>

The substrate must be sound, flat, permanently dry, free from cracks, clean and free of materials...

<p>Shake the Planus container well and pour
into a clean bucket without diluting it. Apply
a thin and even coat of primer with a UZIN
foam roller. Provide ventilation and allow
to dry for at least 2 hours.</p>

Shake the Planus container well and pour into a clean bucket without diluting it. Apply a thin...

<p>Now perform a trial. Rub down Sigan Elements
Plus well on the substrate and check whether
it remains bonded to the substrate. If so, install the Sigan Elements Plus tape along walls
and doors. This provides increased adhesive
strength in the edge areas.</p>

Now perform a trial. Rub down Sigan Elements Plus well on the substrate and check whether it...

<p>Install the Sigan Elements Plus in the running
direction of the new floor covering preferably
roll out overlapping, rub down well and then
cut back to the joint.</p>

Install the Sigan Elements Plus in the running direction of the new floor covering...

<p>Measure the room and divide the tiles. Mark
the starting point of the first row of tiles with
a suitable pen (soft pencil or regular DVD
marker) on the protective paper.</p>

Measure the room and divide the tiles. Mark the starting point of the first row of tiles with a...

<p>Place a steel rail along the measuring points
and align. Pull the protective paper away from
the Sigan Elements Plus. The straight line thus
creates a reference line for the first row of
planks / tiles.</p>

Place a steel rail along the measuring points and align. Pull the protective paper away from the...

<p>Install the tiles along the reference line and
press down firmly by hand.</p>

Install the tiles along the reference line and press down firmly by hand.

<p>After installation, rub down firmly crosswise
over the whole area. The floor covering can be
walked on and used immediately. The luxury
vinyl tiles can be removed years later without
leaving residues.</p>

After installation, rub down firmly crosswise over the whole area. The floor covering can...