RENOPLAN SYSTEM 3

How can old floorboards be prepared to provide a level surface for installing floor coverings? With UZIN PE 630.

Old floorboards are often worn, dished and uneven. Loose and creaking boards and wide joints require a professional treatment in refurbishment work. For this, the specially developed 2-component trowel-applied primer UZIN PE 630 allows for filling the joints and priming the wooden boards all in one coat. Then, application of the self-levelling, fibre-reinforced wood floor levelling compound UZIN NC 175 produces a level and prepared surface. The high polymer content also offers the greatest possible reliability for use on weak substrates.

<p>First firmly screw-fix any creaking or loose boards to the joist or beam.</p>

First firmly screw-fix any creaking or loose boards to the joist or beam.

<p>Then the floor is sanded using a rotary sanding-machine (e.g. grade 16 or 40 abrasive).</p>

Then the floor is sanded using a rotary sanding-machine (e.g. grade 16 or 40 abrasive).

<p>Carefully vacuum up the sanding dust, especially from the joints.</p>

Carefully vacuum up the sanding dust, especially from the joints.

<p>Before priming, fit UZIN expansion strips. After applying the levelling compound, do not trim these but remove them completely. This guarantees better ventilation of the wooden substrate.</p>

Before priming, fit UZIN expansion strips. After applying the levelling compound, do not trim these...

<p>Pour the dispersion component A from the UZIN PE 630 into the original container. Then sprinkle in the powder component B whilst stirring vigorously and blend to a lump-free mix.</p>

Pour the dispersion component A from the UZIN PE 630 into the original container. Then sprinkle in...

<p>Apply UZIN PE 630 and spread a tight coat using a smoothing trowel or grouting-board. Fill any joints or hollows. At a thickness of 1 mm, the drying time should be approx. 40 – 60 minutes.</p>

Apply UZIN PE 630 and spread a tight coat using a smoothing trowel or grouting-board. Fill any...

<p>If the primer is dry, mix the UZIN NC 175 wood floor levelling compound as directed.</p>

If the primer is dry, mix the UZIN NC 175 wood floor levelling compound as directed.

<p>The next step is to pour out the compound in sections onto the surface and distribute using a smoothing-trowel.</p>

The next step is to pour out the compound in sections onto the surface and distribute using a...

<p>Re-work the wet compound using the UZIN Spike Roller. Cut in the proposed covering and bond using the recommended UZIN dispersion adhesive.</p>

Re-work the wet compound using the UZIN Spike Roller. Cut in the proposed covering and bond using...