How to save time when installing floors over tiles, wooden floorboards or flooring grade plywood?
With UZIN PE 630.
Flat surfaces need to be created on subfloors which contain joints such as wooden floorboards, tiles and flooring grade plywood prior to the installation of the floor covering. The quickest and easiest method is with UZIN PE 630 a rapid drying primer and filler which can be applied in one coat. The advantage of UZIN PE 630 lies in its water-binding powder component, which after mixing results in a viscous filling primer. This enables an exceptional bond between both the substrate and the subsequent smoothing compound. The application of a fibre-reinforced smoothing compound such as UZIN NC 196 produces a smooth surface whilst the fibre content ensures the greatest reliability over flexible substrates. The whole system saves time when installing floors over tiles, wooden floorboards or flooring grade plywood.
Video:
Step by step guide:
UZIN NC 175 Fibre-Reinforced smoothing Compound
Self-smoothing, fibre-reinforced cementitious smoothing compound with Level Plus Effect for thicknesses up to 20 mm
- Superior flow characteristics
Can be raked using a WOLFF Screed Rake with an R3 Notch
- Highly absorbent
- Highly flexible
UZIN NC 196 Fibre-Reinforced Smoothing Compound
Fibre-Reinforced Smoothing Compound for thicknesses from 3 to 40mm
- Fibre reinforced
- Thickness range from 3 to 40 mm
- Excellent flow properties and pumpable
- Low stress
- Excellent absorbency
UZIN PE 630 2-Component Trowel-Applied Primer
Dispersion cement based primer and filler
- Fills, seals and smoothes in one application
- Sets hydraulically
- For application thickness up to 1 mm
- Flexible and ductile when set
- Low chromate content according to EU-VO 1907/2006 (REACH) (powder component)
